Tenda AC1200 - Access Internet Through Dynamic IP Address

29
− If the problem persists, refer to View the internet status to find a solution.
Parameter description
Parameter
Description
ISP User Name
When PPPoE is chosen as the connection type, you need to enter the user name
and password provided by your ISP to access the internet.
ISP Password
DNS Settings
It specifies the obtaining method of WAN port DNS address, which is Automatic
by default.

Automatic: The router obtains a DNS server address from the DHCP server of
the upstream network automatically.

Manual: The DNS server address is configured manually.
Connection Status
It specifies the internet connection status.

When “Connected. You can access the internet now.” is shown here, the router
is connected to the internet successfully.

When other information is shown here, the router fails to connect to the
internet. Please take corresponding measures according to the tips provided.
Connection Duration
It specifies the duration since the router is connected to the internet.
4.2.2 Access the internet through dynamic IP address
Generally, accessing the internet through dynamic IP address is applicable in the following
situations:
− Your ISP does not provide PPPoE user name and password, or any information
including IP address, subnet mask, default gateway and DNS server.
− You have a router with internet access and want to add a 4G09 as the other one.
The application scenario is shown below.