43
Method 1: Set the new router to WISP mode
Configuring procedure:
Step 1 Log in to the web UI of the router.
1. Place the new router near the existing router and power it on. Connect your wireless
device to the Wi-Fi network of your new router, or connect a computer to the LAN port of
the new router. Do not connect any device to the WAN port of the new router.
2. Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router. A computer is used for illustration below.
If you have finished the quick setup wizard before, skip to Step 2 to proceed with the configuration.
3. Click Start.
4. Click Skip.
To Next Page
Loading...
