145
4G09.
Step 3 Add a static route rule on 4G09.
1. Choose Advanced Settings > Static Route.
2. Enter the IP address of the destination network, which is 172.16.105.0 in this example.
3. Enter the subnet mask of the destination network, which is 255.255.255.0 in this example.
4. Enter the ingress IP address of the next hop route, which is 192.168.10.20 in this example.
5. Click +New.
---End
When completing the configurations, you can access both the internet and intranet through 4G09
at the same time.
To Next Page
Loading...
