49
1. Choose Advanced Settings > Operating Mode.
2. Click Wireless Router Mode, and click Save.
Step 3 Set the new router to Client+AP mode.
1. Choose Wi-Fi Settings > Wireless Repeating.
2. Enable Wireless Repeating, and choose Client+AP.
3. Click Select to select the existing Wi-Fi network, which is Home_Wi-Fi in this example.
Step 4 Enter the Upstream Wi-Fi Password, which is 12345678 in this example.
Step 5 Click Save.
Step 6 Click OK, and wait for the router to reboot.
To Next Page
Loading...
