65
Step 5 Connect the upstream device, such as a gateway, to any port of the router.
---End
Log in to the web UI of the router again, and navigate to Internet Status to check if the AP mode is
configured successfully.
If there is another network device with the same login domain name (tendawifi.com) with the router,
log in to the upstream router and find the IP address obtained by the new router in the client list.
Then you can log in to the web UI of the router by visiting the IP address.
To access the internet, connect your computer to physical port, or connect your smart phone to
the Wi-Fi network.
You can find the Wi-Fi name and password on the Wi-Fi Settings > Wi-Fi Name & Password page. If
the network is not encrypted, you can also set a Wi-Fi password on this page for security.
To Next Page
Loading...
