44
Parameter Description
Channel Bandwidth
It specifies the wireless channel bandwidth of the AP.
20 MHz: It indicates that the AP can use only 20 MHz channel bandwidth.
40 MHz: It indicates that the AP can use only 40 MHz channel bandwidth.
20/40 MHz: Only available for 2.4 GHz. It indicates that the AP automatically
adjusts its channel bandwidth to 20 MHz or 40 MHz according to the ambient
environment.
80 MHz: Only available for 5 GHz. It indicates that the AP can use only 80 MHz
channel bandwidth.
160 MHz: Only available for 5 GHz. It indicates that the AP can use only 160 MHz
channel bandwidth.
20/40/80/160 MHz: Only available for 5 GHz. It indicates that the AP automatically
adjusts its channel bandwidth to 20 MHz, 40 MHz, 80 MHz, or 160 MHz according
to the ambient environment.
Transmit Power
It specifies the transmit power of the AP.
A higher value leads to wider WiFi coverage. However, decreasing the value properly
increases performance and security of the wireless network.
To Next Page
Loading...
Need help?
General
