It displays the test result.
AVG RX: It specifies the average of received speed.
AVG TX: It specifies the average of transmitted speed.
AVG Total: It specifies the average of the total connection speed.
Examples of Configuring the Speed Test
Assume that CPE1 works in AP mode, and CPE2 works in Client mode and bridges to the WiFi network of CPE1.
Then test the wireless speed between them.
Configuration Procedure
Step 1 Log in to the web UI of CPE2.
Step 2 Choose Advanced > Diagnose.
Step 3 Set Diagnose to Speed Test.
Step 4 Set IP Address of Peer AP to Manual.
Step 5 Enter the IP address of CPE1 to the IP Address box, which is 192.168.2.1 in this example.
Step 6 Enter the login user name and password of the web UI of CPE1 in the User name and Password boxes,
which are both admin in this example.
Step 7 Set Direction to Bidirectional.
Step 8 Click Start.
To Next Page
Loading...
Need help?
General
