128
8.5 MAC Filter (Only for O3)
This function is available only when the CPE works in WISP or Router mode.
8.5.1 Overview
The MAC Filter function enables you to allow or disallow the devices, such as computers, laptops, tablets, and
smart phones, to access the internet via the CPE based on their MAC addresses.
Choose Advanced > MAC Filter to enter the page.
The function is disabled by default.
8.5.2 Configuring MAC Filter
Configuration Procedure
Step 1 Choose Advanced > MAC Filter.
Step 2 Select a MAC filter mode, Disallow or Allow.
Step 3 Enter a remark for the rule, such as somebody’s device.
Step 4 Specify a period at which the rule takes effect.
Step 5 Tick the dates on which the rule takes effect.
Step 6 Click Add.
To Next Page
Loading...
Need help?
General
