Tenda I-WL-O3 User Manual

76
6.5 VLAN Settings
6.5.1 Overview
The CPE supports the IEEE 802.1Q VLAN function, so that it can be used in networks with QVLAN. By default, the
function is disabled.
6.5.2 Setting up VLAN
Step 1 Choose Network > VLAN Settings to enter the configuration page.
Step 2 Enable the function.
Step 3 Set the parameters as needed.
Step 4 Click Save.
----End

Tenda I-WL-O3 Specifications

General

Brand	Tenda
Model	I-WL-O3
Category	Network Router
Language	English