48
4.6 P2MP Mode (Only for O3)
4.6.1 Overview
In P2MP mode, this device connects 2 or more (this device supports 4 at most) wired networks with a wireless
link, but cannot be connected with wireless clients. P2MP mode is used to achieve communication between
multiple offices of an enterprise in a city.
The CPE in P2MP mode can work with the CPE in Repeater or P2MP mode. It supports one to four bridging at
most.
4.6.2 Setting up P2MP Mode
The configuration procedure of P2MP mode is similar to that of Repeater mode. The following example shows
that the main CPE in P2MP mode bridges to four CPEs in Repeater mode.
To Next Page
Loading...
Need help?
General
