157
9.4 System Log
To access the page, choose Tools > System Log.
The logs of the CPE record various events that occur and the operations that users perform after the CPE starts.
In case of a system fault, you can refer to the logs during troubleshooting.
To ensure that the logs are recorded correctly, verify the system time of the CPE. You can correct the system time
of the CPE by choosing Tools > Date & Time.
To view the latest logs of the CPE, click Refresh. To clear the existing logs of the CPE, click Clear.
When the CPE reboots, the previous logs are lost.
The CPE reboots when the CPE is powered on after a power failure, the VLAN function is configured, the firmware is
upgraded, a CPE configuration is backed up or restored or the factory settings are restored.
To Next Page
Loading...
Need help?
General
