9 Tools
9.1 Date & Time
This module enables you to set the system time of the CPE.
Ensure that the system time of the CPE is correct, so that logs can be recorded correctly and the reboot schedule
can be executed correctly.
Choose Tools > Date & Time to enter the page.
The CPE allows you to set the system time by synchronizing the time with the internet or manually setting the
time. By default, it is configured to synchronize the system time with the internet.
Synchronized with the Internet
The CPE automatically synchronizes its system time with a time server of the internet. This enables the CPE to
automatically correct its system time after being connected to the internet.
For details about how to connect the CPE to the internet, refer to LAN Setup.
Configuration Procedure
Step 1 Choose Tools > Date & Time.
Step 2 Set Time settings to Synchronized with the Internet.
Step 3 Specify a time interval. The default value 30 minutes is recommended.
Step 4 Set Time Zone to your time zone.
Step 5 Click Save.
To Next Page
Loading...
Need help?
General
