125
----End
Parameters Description
It specifies the IP address of the host which establishes a server in LAN.
It specifies the service port of the server in LAN. A single port is supported.
It specifies the ports enabled for WAN users by this device.
It specifies the protocol type of the selected applications. Select TCP&UDP when you are not
sure.
It specifies the application services established in LAN.
Click to delete the rule.
8.4.3 Example of Configuring Port Forwarding
Networking Requirement
The CPE is used in a company to deploy its network, and the CPE is set to Router mode.
Requirement: The employees of the company who are on business can visit the resources on the web server in
LAN over the internet.
You are recommended to use port forwarding function to solve the problem.
Assumption:
IP Address of the web server: 192.168.2.100
To Next Page
Loading...
Need help?
General
