28
Step 3 Select the SSID of the CPE1, which is Tenda_123456 in this example, and click Next.
If you cannot scan the SSID of the CPE1 from the list, choose Wireless > Basic and enable the wireless
function. Then try again.
Step 4 Enter the WiFi password you set on CPE1 in the Key text box, and click Next.
Step 5 Set the IP address to an unused IP address belonging to the same network segment as that of CPE1.
For example, if the IP address of CPE1 is 192.168.2.1, you can set this device’s IP address to
192.168.2.X (X ranges from 2 to 254). Then click Next.
To Next Page
Loading...
Need help?
General
