Tenda I-WL-O3 User Manual

30
Name
Description
function of this device, the peer AP is required to support WDS function, and use the same radio
band as that of this device.
P2MP mode: this device connects 2 or more (this device supports 4 at most) wired networks with a
wireless link, but cannot be connected with wireless clients. P2MP mode is used to achieve
communication between multiple offices of an enterprise in a city.
Router mode: in this mode, the PoE LAN/WAN port works as the WAN port and is used to connect to
a modem for internet access.
Transparent Bridge
With the function enabled, IP cameras can be discovered by the NVR.
Upstream AP
It specifies the wireless network name (SSID) of the upstream AP.
Channel
It specifies the operating channel of the WiFi network to be bridged. It will be automatically
populated when you select an SSID to bridge.
Security Mode
It specifies the security mode of the WiFi network to be bridged. It will be automatically populated
when you select an SSID to bridge. If the WiFi network to be bridged has a WiFi password, you need
to enter the password manually.

Tenda I-WL-O3 Specifications

General

Brand	Tenda
Model	I-WL-O3
Category	Network Router
Language	English