It specifies interval at which a WPA key is updated. A shorter interval leads to higher security. The
value 0 indicates that no key update is performed.
Enable: It indicates that the wireless clients connected to the CPE with the selected SSID cannot
communicate with each other. This improves wireless network security.
Disable: It indicates that the wireless clients connected to the CPE with the selected SSID can
communicate with each other. By default, it is disabled.
It specifies the maximum number of wireless clients that can be connected to the wireless
network with the SSID.
After this upper limit is reached, the CPE rejects new requests from clients for connecting to the
wireless network.
None
It indicates that any wireless client can connect to the wireless network. This option is not recommended
because it affects network security.
WEP
To Next Page
Loading...
Need help?
General
