Tenda i27 - Page 14

Document version: V1.0
7
Step 3 Set a wireless network name (primary SSID) in the SSID box.
Step 4 Select a Security Mode and configure the incurred parameters.
Step 5 Click Save.
Step 6 If you need to set other wireless networks in another radio band, please select another
wireless radio band and perform step 2 to 5 again.
---- End
Search and connect your wireless devices such as smart phones to the SSID you set. Enter the
wireless password (the Key you set) and you will be able to access the internet.
Parameter description
Parameter
Description
Radio Band
It is used to select the radio band for configurations.
Working Mode
It specifies the working modes supported by the device.
⚫
AP mode (default mode): This mode is used to convert wired networks into wireless
networks.
⚫
Client+AP mode: This mode is used to bridge the upstream WiFi network.
SSID
Click to modify the WiFi name of the primary network under the selected radio band.
Security Mode
Select the security modes for target wireless networks, including None, WEP, WPA-PSK,
WPA2-PSK, WPA3-SAE, WPA2-PSK&WPA3-SAE, Mixed WPA/WPA2-PSK, WPA and
WPA2.