EasyManuals Logo

Tenda O1 User Manual

Tenda O1
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
86
Name
Description
using WPA2-PSK.
Mixed WPA/WPA2-PSK: It indicates that wireless clients can connect to the wireless network
corresponding to the selected SSID using either WPA-PSK or WPA2-PSK.
Encryption Algorithm
It specifies the encryption algorithm corresponding to the selected security mode. If Security
Mode is set to WPA-PSK, this parameter has the AES and TKIP values. If Security Mode is set to
WPA2-PSK or Mixed WPA/WPA2-PSK, this parameter has the AES, TKIP, and TKIP&AES values.
AES: It indicates the Advanced Encryption Standard.
TKIP: It indicates the Temporal Key Integrity Protocol. If TKIP is used, the maximum wireless
throughput of the AP is limited to 54 Mbps.
TKIP&AES: It indicates that both TKIP and AES encryption algorithms are supported. Wireless
clients can connect to the wireless network corresponding to the selected SSID using TKIP or AES.
Key
It specifies a pre-shared WPA key. A WPA key can contain 8 to 63 ASCII characters or 8 to 64
hexadecimal characters.
Key Update Interval
It specifies the automatic update interval of a WPA key for data encryption. A shorter interval
results in higher data security.
The value 0 indicates that a WAP key is not updated.
WPA and WPA2
Parameters Description
Name
Description
Security Mode
The WPA and WPA2 options are available for network protection with a RADIUS server.
WPA: It indicates that the wireless network corresponding to the selected SSID is encrypted
using WPA.
WPA: It indicates that the wireless network corresponding to the selected SSID is encrypted
using WPA.
RADIUS Server
It specifies the IP address of the RADIUS server for client authentication.
RADIUS Port
It specifies the port number of the RADIUS server for client authentication.
RADIUS Password
It specifies the shared password of the RADIUS server.

Table of Contents

Other manuals for Tenda O1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O1 and is the answer not in the manual?

Tenda O1 Specifications

General IconGeneral
5 GHzNo
Bandwidth2.4 GHz
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate300 Mbit/s
PlacementWall
CertificationFCC/CE/RoHS
Product colorWhite
LED indicatorsLAN, PoE, WLAN
International Protection (IP) codeIP64
Output voltage9 - 12 V
Power consumption (max)2.6 W
Security algorithmsWEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Antenna featuresIntegrated antenna
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth67.5 mm
Width80 mm
Height190.35 mm

Related product manuals