Tenda PON ONT HG9 - Page 105

Advance
95
Parameter description
Parameter
Description
SNMP
It specifies whether to enable the SNMP agent function.
System Description
It specifies a description of the ONT, which can be anything you like and is used for
identification.
System Contact
It specifies the contact information of the ONT.
SystemName
It specifies the name of ONT.
System Location
It specifies the place where the ONT is located.
System Object ID
It specifies the object ID of the ONT in the MIB, which can be used by the SNMP
manager to identify and manage the ONT.
Trap IP Address
It specifies the destination IP address of the SNMP trap. Make sure that the ONT and
the SNMP manager are reachable to each other.
Community name
(read-only)
They specify the community names which act as passwords for the interaction
between the SMNP manager and SNMP agent.
⚫
Community name (read-only): It is used to authenticate the Get request.
⚫
Community name (write-only): It is used to authenticate the Set request.
Community name
(write-only)