Tenda PON ONT HG9 User Manual

VoIP
86
8.7 Set coding type
Codecs enable the ONT to compress digital voice data to reduce bandwidth usage per call. Change
the settings only when necessary.
To set the codec type, navigate to the Codec part. After the parameters are properly configured,
click Apply on the bottom of the page to enable the settings to take effect.
Parameter description
Parameter
Description
Codec
It specifies the coding type used to compress digital voice data, which has higher
priority over other coding types.
Payload Type
It specifies the payload type value for digital voice data coding.
Type
It specifies the coding type used to compress digital voice data.
Packetization
It specifies the packetization rate of digital voice data.
Disable
It is used to disable the selected codec type.
G726 Packing Order
It specifies the packing order when the G726 codec type is used.
G723 Bit Rate
It specifies the bit rate when G723 codec type is used.

Tenda PON ONT HG9 Specifications

General

Brand	Tenda
Model	PON ONT HG9
Category	Network Router
Language	English