Tenda PON ONT HG9 User Manual

WAN
46
6.2 Bridge mode
If you have a router and want to set up internet access on it, or you only want to access the
internet on a certain computer, you can use the ONT under bridge mode.
When the ONT is under bridge mode, you can only access the internet through the downstream device
used for setting up internet access.
Under bridge mode, the ONT acts as a bridging device between your LAN and your ISP. The ONT
works under bridge mode by default.
The network topology of the scenario is shown as follows.
6.2.1 Configure internet access on a computer
Configure your computer to access the internet according to the parameters provided by your ISP.
PPPoE is used for illustration here.
Configuring procedure:
Step 1 Connect your computer to a LAN port of the ONT.
Step 2 Right-click on the desktop and choose Network Connections.
Step 3 Choose Dial-up and click Set up a new connection.
WAN Port

Tenda PON ONT HG9 Specifications

General

Brand	Tenda
Model	PON ONT HG9
Category	Network Router
Language	English