Tenda PON ONT HG9 - 11.11 Logout

Admin
116
Parameter
Description
Connection
Request
Authentication
It specifies whether to authenticate the connection request sent by the ACS.
UserName
They specify the user name and password used to authenticate the ACS
when it sends the connection request to the CPE.
Password
Path
It specifies the path used to receive the connection request sent by the ACS.
Keep the default value if you are not sure.
Port
It specifies the port used to receive the connection request sent by the ACS.
11.11 Logout
To access the page, choose Admin > Logout.
You can log out of the web UI of the ONT by clicking Logout on this page, or click Logout at the
upper-right corner of the web UI.