You can view the clients that connect to the Wi-Fi network by clicking Show Active WLAN
Clients.
⚫
MAC Address: It specifies the MAC address of the client connected to the Wi-Fi
network.
⚫
Tx Packets: It specifies the number of transmitted packets of the client through the Wi-
Fi network.
⚫
Rx Packets: It specifies the number of received packets of the client through the Wi-Fi
network.
⚫
Tx Rate (Mbps): It specifies the transmitting rate of the Wi-Fi network.
⚫
RSSI: It specifies the signal strength of the client received by the AP.
5.1.2 Customize the main Wi-Fi name
Step 1 Choose WLAN > wlan1 (2.4 GHz) > Basic Settings on the web UI.
Step 2 Set SSID.
Step 3 Click Apply Changes.
---End
After completing the configuration, you can search the SSID(s) on your Wi-Fi-enabled devices and
connect to it to access the internet.
5.1.3 Enable multiple wireless networks
Step 1 Choose WLAN > wlan1 (2.4 GHz) > Basic Settings on the web UI.
Step 2 Click Multiple AP. Select Enable to enable any Wi-Fi network as required, set SSID (Wi-Fi
name), and click Apply Changes.
To Next Page
Loading...
Need help?
General
