WLAN
31
5.5 WPS
5.5.1 Overview
The Wi-Fi Protected Setup (WPS) function enables wireless clients that support WPS, such as
smartphones, to connect to the Wi-Fi network of the ONT quickly and easily.
There are four methods to connect to the Wi-Fi network of the ONT through WPS.
− Connect to the Wi-Fi network using the WPS button
− Connect to the Wi-Fi network using PBC on the web UI
− Connect to the Wi-Fi network by entering PIN code of clients on the ONT
− Connect to the Wi-Fi network by entering PIN code of the ONT on clients
To access the page, log in to the web UI of the ONT and choose WLAN > wlan1 (2.4 GHz) > WPS.
5.5.2 Connect to the Wi-Fi network using the WPS button
Step 1 Find the WPS button on the ONT. Press it once and you can see the WPS LED indicator
blinks.
Step 2 Configure the WPS function on your wireless devices within 2 minutes. Configuration on
various devices may differ (Example: HUAWEI P10 smartphone).
1. Find Settings on the phone.
2. Choose WLAN.
3.
Tap , and choose WLAN settings.
To Next Page
Loading...
Need help?
General
