Tenda PON ONT HG9 - 3.3 PON status

Status
18
3.3 PON status
On this page, you can view the PON status and GPON/EPON connection status of the ONT.
To access the page, log in to the web UI of the ONT and choose Status > PON.
Parameter description
Parameter
Description
PON Status
Vendor Name
It specifies the vendor name of the ONT.
Temperature
It specifies the current chip temperature of the ONT.
Voltage
It specifies the current voltage of the optical module of the ONT.
Tx Power
It specifies the transmitted and received optical power of the ONT over the
PON port.
Rx Power
Bias Current
It specifies the current bias current of the optical module of the ONT.
GPON Status
ONU State
It specifies the state of the ONT, ranging from O1 to O7.
⚫
O1 to O4: The ONT is registering.
⚫
O5: The ONT registered successfully and is under normal operation.
⚫
O6/O7: The ONT is in abnormal state and stops transmitting signals.
ONU ID
It specifies the ONU (optical network unit) ID of the ONT.
EPON Status
(HG7/HG6)
Auth state
It specifies the state of the ONT.