WLAN
38
5.6 Status
On this page, you can check the information and status of the Wi-Fi network you set up, including
those virtual AP Wi-Fi networks.
To access the page, log in to the web UI of the ONT and choose WLAN > wlan1 (2.4 GHz) > Status.
Parameter description
It specifies the mode of the Wi-Fi network.
It specifies the wireless band and protocol of the Wi-Fi network.
It specifies the Wi-Fi name of the Wi-Fi network.
It specifies the channel in which the Wi-Fi network works.
It specifies the encryption mode of the Wi-Fi network.
Basic Service Set Identifier (BSSID) is used to describe sections of a wireless local area
network. This service set is the MAC address of the AP’s radio for clients to identify and
connect to.
It specifies the number of connected clients.
To Next Page
Loading...
