Tenda PON ONT HG9 - Page 109

Advance
99
Parameter description
Parameter
Description
DHCPv6 Mode
You can select a DHCPv6 server mode or disable it.
⚫
NONE: The DHCPv6 server of the ONT is disabled.
⚫
DHCPServer(Manual): You need to define the IP address pool, prefix length and
other required parameters for IPv6 addresses to be assigned to IPv6 hosts.
⚫
DHCPServer(Auto): The ONT defines the IPv6 addresses to be assigned to the IPv6
host automatically.
IP Pool Range
It specifies the IP address range within which the ONT can assign IPv6 addresses to
the IPv6 host.
Show Client
It shows information of the active DHCPv6 clients, including:
⚫
IP Address: It specifies the IP address assigned to the DHCP leased client.
⚫
MAC Address: It specifies the MAC address of the DHCP leased client.
⚫
Expired Time (sec): It specifies the time expired for the DHCP leased client.
Prefix Length
It specifies the length of IPv6 prefix.