WAN
53
Step 6 Enter the PPPoE UserName and Password provided by your ISP in PPP Settings.
Step 7 (Optional) If you set IP Protocol to IPv6 or IPv4/IPv6, enter required parameters in IPv6
WAN Setting.
Step 8 (Optional) Configure Port Mapping as needed.
Step 9 Click Apply Changes.
---End
After the configuration, you can access the internet through the LAN ports or Wi-Fi networks of the
ONT, or by connecting a router (connection type: DHCP/dynamic IP) to a LAN port of the ONT.
To Next Page
Loading...
