Tenda PON ONT HG9 - Page 71

Services
61
6. Enter the user name and password in the DynDns Settings part, which are JohnDoe and
JohnDoe123456 in this example.
7. Click Add.
Step 3 Configure the port forwarding function (refer to port forwarding).
---End
After the configuration, users from the internet can access the FTP server by visiting “Intranet
service application layer protocol name://Domain name”. If the remote port number is not the
same as the default intranet service port number, the accessing address should be: “Intranet
service application layer protocol name://Domain name:Remote port number”.
In this example, the address is ftp://o2849z7222.zicp.vip.
To access the FTP server from the internet with a domain name:
Open the file explorer on a computer that can access the internet, and visit
ftp://o2849z7222.zicp.vip.
Enter the user name and password to access the resources on the FTP server.