User Guide
159
Scheduling Scheme
Click QoS -> QoS Configuration -> Scheduling Scheme to enter interface below:
To configure scheduling scheme, select SP or WRR from the pull-down list and then click OK.
To configure queue settings, select WRR scheduling scheme first, and then configure the queue
weight values accordingly.
802.1P
To configure CoS priority settings, click QoS -> QoS Configuration -> 802.1P as below:
Then select the queue values for CoS priority 0-7 and click OK.
Note--------------------------------------------------------------------------------------------------------------------------------
When congestions occur, according to the mapping relationships you’ve configured, the device will assign
packets with CoS priority to queues.
-------------------------------------------------------------------------------------------------------------------------------------------
DSCP
To configure DSCP priority settings, click QoS -> QoS Configuration-> DSCP as below:
To Next Page
Loading...
