Tenda TEG3224P - Page 124

User Guide
176
6. Click Bind and system will automatically bind the IP addresses on the current page, namely 10 items.
To re-search for host, click the Search Hosts button to return to the search page.
To delete a single host just searched, click the corresponding Delete button. To delete all searched host,
click Delete All.
 To add IP+MAC+Port+VLAN Binding entries manually
1. Click Security -> IP Filter -> Add Binding Entry and on the appearing interface, select Add
IP+MAC+Port VLAN Binding entry manually.
2. Enter an IP address, for example "192.168.10.1".
3. Enter a MAC address, for example "aaaa-bbbb-cccc".
4. Enter a port number, for example "24". This item is optional.
5. Enter a number in VLAN ID field, for example "1". This item is optional.
6. Click OK. The IP+MAC+Port+VLAN Binding screen will display added binding entries.
 Port Filter Setup
The IP+MAC+Port+VLAN Binding entries take effect only after the IP filter feature is enabled.
To config Port Filter settings on a single port: click Security -> IP Filter -> Port Filter Setup, select a port
NO, select Yes from the IP Filter drop-down list and click OK to enable the IP filter feature.