Tenda TEG3224P User Manual

User Guide
198
TENDA(config)# interface range gigabitethernet 0/1-2
TENDA(config-if)# no trunk-group
Note: Delete member ports 1-2 from the aggregation group
 Config LACP settings
TENDA(config-if)# lacp priority 65535
Note: Set LACP port priority to 65535
TENDA(config-if)# lacp timeout long
Note: Set timeout to long
TENDA(config-if)# lacp timeout short
Note: Set timeout to short
TENDA(config)# lacp system-priority 65535
Note: Config LACP system priority
TENDA(config)# port-channel load-balance dst-mac
Note: Config destination MAC algorithm
TENDA(config)#port-channel load-balance src-dst-mac
Note: Config source and destination MAC algorithm
TENDA(config)# port-channel load-balance src-mac
Note: Config source MAC algorithm
TENDA(config)# port-channel load-balance src-dst-ip
Note: Config source and destination IP algorithm
 View aggregation info
TENDA# show aggregate-port
Note: View aggregation group
TENDA# show lacp all counters
Note: View LACP packet statistics
TENDA# show lacp all internal
Note: View peer LACP port info
TENDA# show lacp all neighbor
Note: View remote LACP port info
TENDA# show lacp sys-id
Note: View local LACP system priority and MAC address

Tenda TEG3224P Specifications

General

Brand	Tenda
Model	TEG3224P
Category	Switch
Language	English