User Guide
206
TENDA(config)# spanning-tree forward-time 4
Note: Set Forward Delay to 4s
TENDA(config)# spanning-tree mstp max-hops 30
Note: Set max hops to 30
TENDA(config)# spanning-tree mstp 0 priority 32768
Note: Set instance priority
Note-------------------------------------------------------------------------------------------------------------------------
BPDU message broadcast and filter take effect when STP is disabled.
-------------------------------------------------------------------------------------------------------------------------------------
Reset STP system settings
TENDA(config)# no spanning-tree mode
Note: Delete current STP version setting and restore it to the default mstp
TENDA(config)# no spanning-tree max-age
Note: Delete current max age setting and restore it to the default 20
TENDA(config)# no spanning-tree hello-time
Note: Delete current Hello Time setting and restore it to the default 2
TENDA(config)# no spanning-tree forward-time
Note: Delete current forward delay setting and restore it to the default 15
TENDA(config)# no spanning-tree mstp max-hops
Note: Delete max hop setting and restore it to the default 20
TENDA(config)# no spanning-tree mstp 0 priority
Note: Delete instance bridge priority setting and restore it to the default 30768
Configure MSTP domain
TENDA(config)# spanning-tree mstp configuration
Note: Enter MSTP configuration interface
TENDA(config-mst)# name 2222
Note: Configure domain name
TENDA(config-mst)# revision 52
Note: Configure revision level
TENDA(config-mst)# instance 2 vlan 52
Note: Configure vlan mapping and enable this instance
TENDA(config-mst)# no name
To Next Page
Loading...
