Tenda TEG3224P - Page 24

User Guide
18
DHCP Relay
Allows users to implement DHCP among multiple
VLANs.
DHCP Snooping
Allows users to configure DHCP snooping settings,
DHCP server trust settings and client access
settings.
QoS
CoS
CoS priority 0-7 is supported. Default 0 and 3
correspond to queue 1; 1 and 2 correspond to 2; 4
and 5 correspond to queue 3; 6 and 7 correspond to
queue 4.
DSCP
DSCP priority 0-63 is supported.
Scheduling
Scheme
SP and WRR are supported. By default, it is SP.
Port Priority
Port priority 0-7. The default is 0.
Rate Limit
Allows users to configure ingress and egress rate
limit.
Storm Constrain
Allows users to configure broadcast, multicast, and
unknown unicast constrain settings.
ACL
Allows users to configure MAC/IP ACL settings. Up
to 100 entries can be configured.
Security
ARP Attack
Defense
Allows users to configure ARP attack defense
settings.
Worm Attack
Defense
Allows users to configure TCP and UDP settings to
filter packets.