GREER COMPANY 1918 EAST GLENWOOD PLACE, SANTA ANA, CA 92705 PN W450250 Rev A 06/01/00
TEREX RCI 510 RATED CAPACITY INDICATOR OPERATOR'S MANUAL TEL:(714) 259-9702 FAX:(714) 259-7626
21 of 35
The system has the capability of remembering all of the configuration data
previously set. After removing power to the system and then powering up again,
the settings remain intact until reset by the operator.
After the configuration has been set, the operation of the System
depends only upon setting which winch is in use. Changing the winch
will automatically change the lifting point and the parts-of-line to the
values previously set for the selected winch. Always check the point of
lift and parts-of-line following selection of the winch.
TEST
6
23,500
i2,300
44.8
62.7
26.4
To Next Page
Loading...
