To Next Page

To Previous Page

3-13 TA9 &TA10 Dumper 0803-3 December 2010

Safety

Safety Sign Description (ISO)

Item Decal Description Notes

1 Read Instruction Manual -

2 Remove start key before doing any maintenance work -

3 No passengers -

4 Beware high pressure oil leaks -

5 Gradient instructions -

6 Do Not Use On Public Highway (Only fitted with item 7) Dashboard

7 Dashboard Decal - No Lights Dashboard

8 Dashboard Decal - Site Lights Dashboard

9 Dashboard Decal - Road Lights Dashboard

10 Instruction Manual Location. -

11 Straight Skip control valve lever positions -

12 Vehicle Sound Power Level -

13 Keep Clear of Fan/Wait Until Moving Parts Have Stopped Completely -

14 Keep Clear of Machine - Crush Zone -

15 Read Manual Before Towing -

16 Hydraulic Oil Filler Point On Tank

17 Diesel Fuel Filler Point On Tank

18 Tyre Pressure Rear -

19 Tyre Pressure Front -

20 Always use Seatbelt when operating the machine -

21 Crush Zone - Keep Clear -

22 Remove Start Key And Fit Articulation Lock Before Maintenance -

23 Fit skip prop BEFORE doing maintenance under the skip -

Safety

Signs

IMPORTANT

ALL safety signs listed must be fitted to the machine and must be legible. Use mild soap and water to clean

safety signs - DO NOT use solvent based cleaners because they may damage safety sign material.

Safety signs are fitted to the machine to warn of possible dangers and MUST be replaced immediately if they

become unreadable or lost.

If the machine is repaired and parts have been replaced on which safety signs were fixed, ensure new safety

signs are fitted before the machine is put into service.

Terex TA10 User Manual

Other manuals for Terex TA10