6-1 TA9 & TA10 Dumper 0803-2 November 2009
Inspection
General Inspection
Before each days operation of the dumper the operator must
perform the General Inspection as outlined in the Check List on
the following page.
The purpose of the Operators Inspection is to keep the dumper
in proper working condition and to detect any signs of
malfunction during normal operation between scheduled
maintenance intervals.
Read the Safety Section of this manual before performing the
inspection.
While it may not be the operators responsibility to perform
mechanical maintenance the operator must be thoroughly
familiar with the machine and its proper care since their own
safety is involved.
b
Before Carrying Out Checks Read Safety Section Of This
Manual
To Next Page
Loading...
Need help?
General
