Operating Instructions
TA9 & TA10 Dumper 0803-3 December 2010 7-6
Seat Belt
• Sit on the seat, place the seat belt across the hips and insert
the inner buckle (B) into the outer buckle (A) until it locks
into position.
• Adjust by pulling the belt through buckle (B) until it is a
firm, comfortable fit across the hips.
• To remove the seat belt, press the button (C) and pull inner
buckle (B) away from outer buckle (A).
b
Seat Belt must be locked in position across the Operators
hips BEFORE operating the machine if ROPS/FOPS fitted
To Next Page
Loading...
Need help?
General
