TL260
Introduction
02_Introduction_en.fm - V 0.1 - 14.4.11
9 / 187
2
10
2.6 Declaration of Conformity
The wheel loader meets the general requirements of the applicable European
directives.
Conformity has been proven. The respective documents and the original of the
Certificate of Conformity are kept by the manufacturer.
A copy of the Certificate of Conformity is attached to the sales documents.
EC declaration of conformity
according to the Machinery Directive 2006/42/EC
1. We hereby declare that the earth-moving machine of type TL 260:
Wheel loader: TL 260
Vehicle ID No.: TL0260
Actual productivity: 129 kW
2. complies with the following applicable regulations:
2006/42/EC, 2004/108/EC (EMC), RL 2000/14/EC Appendix VIII (noise emission)
3. Representative sound power level:
103.4 dB(A)
4. Guaranteed sound power level:
105 dB(A)
5. Applied harmonized standards:
EN ISO 12100-2
6. Applied European standards:
EN 474-1
EN 474-3
7. Document editor, who is authorized to compile technical documentation:
Maik Schulze, D 74564 Crailsheim, Kraftwerkstrasse 4
8. Voluntary type examination performed as well as certification in accordance with
RL 2000/14/EC Appendix VIII at:
Fachausschüsse Bau (BAU) und Tiefbau (TB)
Prüf- und Zertifizierungsstelle im BG-PRÜFZERT
80687 Munich, Germany
The EC declaration of conformity only applies if the earth-moving machine is used in accordance
with the operating instructions. It includes the use of original Terex work attachments and other
work attachments, which are mentioned in the operating instructions or in other Terex
documentation for application on this earth-moving machine.
Replaceable attachments manufactured by Terex or third party manufacturers may only be
installed and used if the installation on the affected earth-moving machine is performed by Terex.
In all other cases, special written approval is required from Terex.
Date of the declaration of conformity 29.12.2009
Langenburg
Terex GmbH
Geschäftsbereich Terex Schaeff
Schaeffstrasse 8
74595 Langenburg, Germany