TL260
Safety
03_Safety_en.fm - V 0.1 - 14.4.11
21 / 187
3
32
Regulations
concerning
environmental
protection
Comply with the valid environmental regulations when working on or with the
machine.
Take special care that no environmentally harmful substances, like
lubrication grease and oils, hydraulic oils, fuels, coolants and solvent
containing cleaning fluids do not seep into the ground or the sewer when
performing installation, repair and maintenance work. These substances
must be collected, transported, kept and disposed of in suitable containers.
If the substances listed above enter into the soil, the leak or outlet must be
stopped immediately and the fluid must be cleaned up with a suitable
absorbent material. If necessary, the soil involved must be removed.
Properly dispose of binding agent and excavated material, comply with valid
environmental regulations.
3.6 Operation
Operate the control equipment only from the driver's seat.
To access and exit the machine use only the steps and areas provided for
this purpose.
Make sure that the operator’s stand, access steps and other surfaces on the
machine, which have to be stepped on, are kept free of dirt, grease, oil, ice,
and snow.
To Next Page
Loading...
