TL260
Maintenance
06_Maintenance_en.fm - V 0.1 - 14.4.11
81 / 187
6
11
6.7.5 Fuel system
Refueling
Fig. 6-19 Refueling
Check the fuel level (1) in the gauge.
In order to prevent the formation of condensation water before the machine
is put into operation the next time, top up fuel through the filler opening (2)
every day after use.
Danger of injury
Personal injury due to
excessive pressure while
refueling.
Z Open the fuel tank cap when
topping up fuel using the
electric refueling pump to avoid
excessive pressure in the fuel
tank!
To Next Page
Loading...
