Terex TL260 - Inspection Intervals

TL260
Maintenance
48 / 187
6
06_Maintenance_en.fm - V 0.1 - 14.4.11
11
6.3 Inspection intervals
Tab. 6-1 Inspection intervals
Note
The reading of the operating hour meter in the control console is decisive for
the inspection intervals of the machine. See chapter 5.2.2 "Front control
console", page 38.
Interval Description See page...
Initial inspection Once before first putting into operation -
Daily tasks Every 10 operating hours or every work
shift
1)
60
Weekly tasks Weekly or after 50 operating hours
1)
61
100 operating hours Once after first putting into operation
2)
62
500 operating hours After every 500 operating hours or after
6 months
62
1000 operating hours After every 1000 operating hours or
after 12 months
62
2000 operating hours After every 2000 operating hours or
after 2 years
62
1)
whichever comes first
2)
also applicable if new or overhauled engines are put into operation.