TL260
Operation
07_Operation_en.fm - V 0.1 - 14.4.11
141 / 187
7
15
7.2.4 Changing work attachments
Various work attachments are available to achieve maximum utilization of the
machine for a variety of applications.
The machine is equipped with a quick-attach system, to shorten the time it takes
to change attachments.
When mounting a multi-purpose bucket, front sweeper, etc., an additional
control circuit is required.
Danger to life
Physical injury due to incorrectly
fastened work attachment.
Z Perform a visual check to ensure
that the quick-attach system is
correctly locked.
Damage to persons and
property
Danger of injury due to unsecured
work attachments.
Z Secure unused working
attachments with wedges or
similar.
Property damage
Machine damage due to additional
control circuit which has not been
switched off.
Z The additional control circuit must
be switched off unless a
hydraulically operated additional
attachment is connected.
Note
Under certain circumstances, it is possible to use the work attachments of
predecessor models on our machines. When mounting work attachments of
predecessor models, however, these may have to be adjusted and/or are
subject to utilization restrictions. The installation of work attachments which
are not included in our product range requires our written approval. It is
essential to consult your dealer before mounting such a work attachment.
Note
The bearings on the quick-attach system and work attachment must be free
of dirt.
To Next Page
Loading...
