Terex TL260 - Air Intake System

TL260
Maintenance
76 / 187
6
06_Maintenance_en.fm - V 0.1 - 14.4.11
11
6.7.4 Air intake system
Cleaning the dust ejection valve
Fig. 6-15 Cleaning the dust ejection valve
Dust ejection valves (1) are almost maintenance-free.
 Remove possible dust deposits by pressing the valve together.
Checking the air intake
 Clean the air intake space in front of the air filter from any dirt (foliage, etc.).
 Check the air filter fastening for damage.
 Check the air channel after the air filter for leaks.
 Check the rubber parts for damage.
 Replace damaged parts immediately.
CAUTION
Property damage
Machine damage caused by
dust being drawn into the
engine.
Z All maintenance work on the air
intake system must be carried
out with the engine shut down.
Z Do not start the engine after the
filter cartridge has been
removed.
Z Use only undamaged air filter
cartridges.
4560_6015
1