TL260
Safety
03_Safety_en.fm - V 0.1 - 14.4.11
15 / 187
3
32
Servicing and replacing safety signs
The safety of the operator always has to come first.
Safety signs must always be kept in good condition and legible.
Replace any safety sign which has been damaged or disappeared.
Use mild detergents and water to clean the safety signs.
Do not use any solvent containing cleansers.
Always specify machine serial number and language when ordering safety
signs.
3.2.1 Pictograms
The following pictograms may be attached to the machine:
Pictograms Description Pictograms Description
Brake
accumulator
pressure
Preheating
Battery charge
indicator
Parking brake
Coolant
temperature
Travel direction
FWD/REV
Direction
indicator LT/RT
High-beam
indicator
Engine oil
pressure
Air filter
Fuel Travel speed,
FAST
High gear Working
hydraulics shut-
off
- +
P
II
To Next Page
