TL260
Safety
20 / 187
3
03_Safety_en.fm - V 0.1 - 14.4.11
32
3.5 General safety notes
• It is important to refrain from any working methods which impair safety.
• The machine may only be operated with cabin or canopy.
• The machine is only to be used if it is in a safe, operational condition.
• The manufacturer’s instructions must be complied with for operation,
maintenance, repair, assembly, and transportation.
• The plant operator must provide additional special safety instructions,
wherever necessary, for specific local conditions.
• The operating instructions and any information pertaining to safety must be
carefully kept in the driver's cab.
• The operating instructions and safety notes must be complete and fully
readable.
Before starting
work:
Before starting work become acquainted with the First Aid and Rescue
Possibilities (Emergency Doctor, Fire Brigade, Rescue Services).
Check that the first aid kit is available and properly stocked.
Become familiar with the location and the operation of fire extinguishers on
the machine, as well as the local fire alarm and fire fighting facilities.
Fasten any loose parts, e. g. tools and other accessories.
Close all doors, windows, hoods, flaps, or secure these in open condition
against unintended closing.
During work
Do not make any safety features ineffective and do not remove any safety
features.
Wear protective clothing for operation. Take off rings, scarves, open jackets.
Protective goggles, protective boots, helmets, gloves, reflecting jackets, ear-
muffs, etc. may be required for certain work.
To Next Page
Loading...
