TL260
Maintenance
62 / 187
6
06_Maintenance_en.fm - V 0.1 - 14.4.11
11
6.6.3 Inspection plan machine
Work to be carried out by trained specialist dealer personnel:
Note
Perform all inspection work at operating temperature of the machine.
Item Inspection Operating hours See
o = Check, x = Replace af-
ter
100
ev-
ery
500
ev-
ery
1000
ev-
ery
2000
min
2 x
year
min.
1 x
year
1 Check machine for presence of
machine-specific operating
instructions
oo
2 Change the engine oil x x P. 68
3 Change the engine oil filter x x P. 69
4 Drain water from the fuel tank o o o P. 84
5 Replace the fuel filter x x P. 82
6 Check the air intake o o P. 76
7 Replace main air filter cartridge according to the service indicator x P. 78
8 Replace the air filter safety cartridge as required
1)
9 Check antifreeze level in coolant o P. 71
10 Change coolant x P. 72
11 Check V-belt tension o o P. 85
12 Check engine mount and pump
attachment
oo
13 Check engine speed setting, upper
and lower idle speeds
oo
14 Check valve lash on the engine and
adjust if necessary
oo
15 Check injection valves every 5000 oh (I= 0.25, O = 0.50)
16 Check the crankcase ventilation
system
o
17 Check acid level and battery
connections
oo P. 102
18 Check condition of tires, tire pressure
and fastening of wheel nuts
oo
19 Check fastening of axles and propeller
shaft
oo
20 Check bearing bushings and pins/bolts
of work equipment and adjust to "no
play"
oo
To Next Page
Loading...
