Terex TL260 - Operation in Closed Spaces; Work Stoppages

TL260
Safety
03_Safety_en.fm - V 0.1 - 14.4.11
27 / 187
3
32
3.16 Operation in closed spaces
If machines are to be used in closed spaces, these areas must be sufficiently
ventilated and special regulations observed.
3.17 Work stoppages
 Before rest periods and the end of work park the machine on a level base of
sufficient load bearing capacity and secure it reliably against unintended
moving.
 Before rest periods and the end of work lower the working attachment to the
ground to prevent it from moving.
 Do not leave the machine before you have lowered and secured the work
equipment.
Machines are only to be parked in places where they do not obstruct, e. g. public
or construction site traffic. Warning devices, e. g. triangles, warning cordons,
flashing or hazard lights are to be used if necessary.
 Before leaving the operator's stand return all control elements to neutral
position, apply the brakes and switch of the working hydraulics.
 Before exiting the machine shut down the engine and secure it against
unauthorized restarting (e. g. by pulling out the ignition key or disconnecting
the battery if necessary).