TL260
Maintenance
06_Maintenance_en.fm - V 0.1 - 14.4.11
57 / 187
6
11
6.5 Lubrication
Lubricants The machine’s life expectancy and operating condition largely depend on the
use of the specified lubricants and compliance with the service intervals.
If lubricants which do not conform to our recommendations are used,
consequential damage may occur for which we will not assume liability, even
inside the warranty period.
Property damage
Damaged grease nipples can
cause machine damage.
Z Check grease nipples for
grease passing through.
Z Replace damaged grease
nipples immediately.
Note
The intervals stated apply for single-shift operation.
In case of special operating conditions, e.g. working on sandy soil, the
lubrication intervals should be shortened, in order to achieve self-cleaning of
bearing points.
Note
Lubricate all lubrication points with multi-purpose grease. Grease
specification: See chapter 6.4.2 "Consumables", page 52.
To Next Page
Loading...
