TL260
Maintenance
66 / 187
6
06_Maintenance_en.fm - V 0.1 - 14.4.11
11
6.7.1 Display
The levels of engine oil, hydraulic oil and coolant can be read on the check
display.
Checking the fluid levels
Fig. 6-6 Checking the fluid levels
Switch on the ignition.
J The symbols “hydraulic oil level” (1) and “coolant level” (2) light up for approx.
3 sec on the display.
J If the level is insufficient, the relevant level indicator lamp continues to light
up.
If required, top up the missing fluid.
Note
All checks must be carried out with the machine standing on level ground
and cooled down.
Note
With the diesel engine running, the level indicator is without function!
To Next Page
Loading...
